 |
Canon Deluxe Photo Backpack 200EG for Canon EOS SLR Cameras (Black with Green Accent) by Canon Cameras US
Digital Photo Product DetailsManufacturer: Canon Cameras US Model: 200EG Color: black Product features: - Bag fits two smaller SLR camera bodies, 3-4 lenses, and additional small accessories
- Constructed of waterproofed polyester and nylon
- Water repellant and urethane coated for extra durability
- Padded divider system for on-the-go organization; includes tripod straps on pack bottom
- Lightweight, with padded shoulder straps and back for comfortable use
Accessories:
Digital Cameras Photo Reviews of Canon Deluxe Photo Backpack 200EG for Canon EOS SLR Cameras (Black with Green Accent)Customer Review: Great value, great item! [UPDATE: changes in new 2011 revision) Summary: 4 Stars
[UPDATE - March 2011 - After a few years, my backpack was starting to wear out. It's held in there and still works fine, but it's gotten a little beat up. Because of the low price and lightweight, I decided to buy a 2nd one as a replacement. The 2011 version (despite being the same model #) is different in some areas (better or worse, you decide). The front-pocket has been sealed up tightly, making removal of the CANON logo on the front impossible without actually cutting through the fabric. The method below no longer works on the 2011 revision, which is disappointing. It also seems like it may be glued on, as you can't even pull it forward.
The middle pocket now includes 3 slots in the center - I'm guessing these are to hold SD cards (1 card per slot). The pockets are very small, so they likely can't hold a CF card. I plan to use these to hold mini-batteries for flash transmitters. There is also a "chest-strap" with buckle on the front (between both shoulder straps) - this was not on my original backpack and I don't care for it so I'll be removing it if I can, and also a waist-strap. I really don't like either, and the waist-strap is permanently attached. The back-padding seems to be a bit more on this model, and the shoulder straps have some thick foam inside making them VERY stiff. My biggest disappointments are how everything is sealed tightly.. There is no easy way to remove the waist-strap other than cutting it, and that seems to be the case with a number of pieces on the backpack, and wasn't the case with the earlier version.
The backpack is still only available in black with an ugly olive color. I purchased this over the AmazonBasics alternative because I need the holes in the zippers so I can attach locks. After seeing the changes in this new revision, I think I'm just going to return it and go back to my old one. If I could buy the pre-2011 version again, I definitely would. I also own heavier-duty backpacks, but this is the lightest one by far, which I really like (the others are easily 5-6 pounds while this is near lightweight).
UPDATE2 - I found a way to remove the Canon logo on the new model without doing much damage. Open up the front zipper, and reach your hand up behind the CANON pin. It's covered in material, but you should feel a metal rectangle shape with 2 smaller pieces raised near the sides. These raised pieces are actually aluminum "poles" that hold it in place, they're just bent sideways to keep it there. Take a pair pliers and you can see that you can twist/bend them (it's a light aluminum).. If you bent them around a few times, they'll actually snap off and release the CANON logo on the front. From there, you can either leave the rectangular metal piece inside the backpack (behind where the logo was) or remove it. To remove it, take a knife or scissors and make a small cit (about 1/4") on one end of the "Rectangle" (inside the front pocker). You can then pull out the metal backing piece. You'll see a turquoise looking fabric inside, you can pull that out too (it's meant to hold the rectangle in place and has no other use). The 1/4" hole is unnoticeable and can be sewn up easily. ]
Original review (pre-2011 model):
I just made the switch from Point and Shoot photography to a DSLR less than 6 months ago and have been looking for the perfect travel bag since. I've gone through the camera bags that hold a single camera and lens to the larger carrying cases such as the Canon 200DG Digital Camera Gadget Bag (Black) but they either had me leaving half of my accessories at home or left me wandering around with a large (and obvious) camera bag which was both tough to navigate through crowds and also made you look like an obvious "target" to any potential thieves in the area. I found that within a few months, even the bags such as the 200DG had me leaving all my accessories at home because they simply wouldn't fit. That's when I figured it would be time to look into a new option.
I first looked at the Tamrac 5577 Expedition 7 SLR Photo Backpack (Black) but the high price (6x the price of the Canon Backpack) left me looking for a lower priced solution.. Strange enough, that brought me to the Canon branded backpack (isn't Canon supposed to be the one charging $200 for the backpack?!)
It had glowing reviews all around and for $35, I figured I'd give it a shot.
Much like the 200DG bag, it uses a velcro interior with removable walls that you arrange to fit all of your equipment. Since I already had the 200DG I decided to use some of the removable walls from that bag to better support the contents in the 200EG backpack.
The canon is advertised to hold 1-2 cameras and 3-4 lenses, and I'd say that's about accurate if dealing with smaller lenses (kit lenses, for example).
My backpack currently consists of:
Main Compartment:
* Canon XTI w/ Canon battery grip, neckstrap and handstrap with a 70-200mm f/4L IS lens attached
* 70-200mm f/4L IS lens hood
* 50mm f/1.8 lens
* 18-55mm f/3.5-5.6 kit lens
* 580EXII Flash
* Whaletail diffuser
* Battery case (8x AA)
..and with those inside, the main compartment of the pack is filled to the point where it could possibly hold 1 more small lens.
One thing worth noting is that even the XTI (a small camera compared to some of the non-rebel SLR's) with battery grip attached is a tight fit - the battery grip lifts the camera to the point that the back is about 2 inches above the zipper line of the bag when opened. This could cause 2 potential problems:
(1) the back of the camera (which is held at the top of the bag) leans forward due to the bulge of the Battery Grip - this could easily be enough to send the camera forward (and out of the bag) if the zipper comes undone, and (2) pushes the lens downward in the backpack because of the several inch difference from the battery grip.
I solved the first problem by adding 2 velcro straps (one going over the camera body and the other going over the lens (in addition to the one already crossing the lens). This makes me feel much better if the zippers were to come open (or you forgot to close them before standing up with the backpack on). I solved the second problem by using some soft foam padding to support the lens and keep it even with the camera body so that it's not pushed downward.
The inside of the backpack also has 2 mesh pockets on the inside which I use to hold my:
* CF cards (4) and
* other small accessories (diffuser gels, tripod attachments, etc..)
On the front of the bag is another zipper compartment - enough room to hold clothes, I use it to hold my:
* Giottos AA1900 Large Rocket Blaster
* Canon CP-E4 Compact Battery Pack, battery grip AA cartridge,
* camera/lens caps,
* Joby GP3-01EN Gorillapod SLR-Zoom Flexible Tripod for Digital SLR Cameras,
* Canon Remote Switch RS60 E3 and
* other small accessories (pens, velcro strips, etc..)
In front of that zipper compartment is a 3rd. Much smaller than the previous, this one is good for holding small/thin accessories. I use it to hold my:
* microfiber cloths
All together, that's a lot of items in one bag - much more than I could dream about holding in my previous bag.
On the bottom of the bag are are tripod straps - I havent given them a try yet due to the weight of my tripod (approx. 10 lb's with the tripod head attached). There are also chest-straps to better secure the backpack while hiking (also have not tried these).
One neat feature I found to be useful is the black webbing on the front of the backpack - by putting a monopod in there and tightening the ropes, you can use it to mount an external flash (useful for when you don't have a flash bracket or find yourself often changing from vertical/horizontal and don't want to adjust the flash/bracket each time). I'm not sure if thats the use for this area, but that's what I use it for!
There are also 2 side pockets good for holding accessories (a point and shoot camera, flash unit, etc..)
With that out of the way, I made a few modifications to the backpack (note that these may void your warranty):
The CANON logo on the front is a very easy to spot "target" for potential thieves. By opening the very front zipper pocket (the thin one that I use to hold the Microfiber cloths) you can easily remove this logo. The logo is much like a pin with a metal backing piece. You can bend the metal prongs out of the way to remove the logo (it can also be reattached later if needed). Another option is to simply cover it with a patch.
There is also a smaller Canon logo on a tag in the front. This can be removed with a quick snip from a pair of scissors.
My next additions also help protect the equipment from potential thieves (as well as further secure the contents of the bag). By purchasing a small package of key-locks (I paid under $10 for a 4-pack at a crafts store). You can even buy them here at Amazon: Master Lock #121Q 4PK 3/4"BLK Brass Padlock
Note that the ones I purchased are black (not gold as shown in the picture) and are quite small - the perfect size to connect to the holes on the zippers of the backpack. Simply connect the lock going through each pair of zippers (the 2 on the main compartment, for example) which will prevent the bag from opening on it's own.. or from other people who don't belong in there! I used the 4 locks throughout the bag for more security (this particular model uses the same key to open all 4 locks so you don't need to worry about multiple keys).
The next suggestion is also cheap: Velcro
I paid $1 for a 3-foot strip from a generic brand and it seems to work perfectly. use these to secure each inside compartment to prevent items from falling out if the backpack is opened (similar to my camera protection method listed earlier in the review). One small strip and I was able to turn the bag upside down (while opened) without anything falling out.
Bonus:
If you own the canon 200DG bag, you can use those included inserts for extra padding or dividers.
Walking around (with the additions), I feel very secure that pieces won't come crashing to the ground. It's also nice to carry EVERYTHING with me when needed!
The backpack is comfortable to me - not the best but not bad. Compared to carrying the 200DG over my shoulder, it's very nice!
For the Rebel series, I highly recommend it. If using a higher end camera, it may be too small.
Description of Canon Deluxe Photo Backpack 200EG for Canon EOS SLR Cameras (Black with Green Accent)Made of rugged nylon, the Canon Deluxe Backpack 200EG holds up to 2 camera bodies, 4 lenses, plus accessories. With its lightweight construction, it also features a well-arranged divider system for a secure storage and an easy access, padded shoulder straps and a comfortable back padding. You can also add tripod carrying straps, and a front webbing ideal for lashing light jacket, sweater, etc. Features : Waterproof and zippered case for cameras Holds up to 2 camera bodies, 4 lenses and accessories Well-arranged divider system offers secure storage and easy access Padded shoulder straps makes carrying the case easy
Cases & Bags
|
 |
|
|
2 Pack LP-E8 LPE8 Equivalent Battery for Canon EOS Rebel 550D, Rebel T2iDigital CameraBest price: $3.21
Triple Tripod Kit + Wireless Shutter Release Remote Control For Canon EOS Rebel T3i, T2i, T1i, XT, Xti, 5D, 7D DSLR (Canon RC-5 & RC-6 Replacement) Includes 57" Full Tripod + 67" Monopod + 10" Flexible Tripod + Wireless Shutter Release + MicroFiber ClothButterflyPhoto; Digital CameraBest price: $29.95Price in other shops: $59.99
Canon EOS Rebel T3i 18 MP CMOS APS-C Sensor DIGIC 4 Image Processor Digital SLR Camera with EF-S 18-55mm f/ 3.5-5.6 IS Lens + Canon EF-S 55-250mm f/ 4.0-5.6 IS Telephoto Zoom LensCanon; Digital CameraBest price: $899.00Price in other shops: $1,198.00
Canon EF 50mm f/ 1.8 II Camera LensCanon; Digital CameraPrice in other shops: $200.00
Fotodiox Canon EOS Macro Extension Tube Set Kit for Extreme Close-up, fits Canon EOS 1d,1ds,Mark II, III, IV, 5D, Mark II, 7D, 10D, 20D, 30D, 40D, 50D, 60D, Digital Rebel xt, xti, xs, xsi, t1i, t2i, t3, t3i, 450D, 500D, 550D, 1000D, 1100DFotodiox; Digital CameraBest price: $6.45Price in other shops: $29.95
58mm Multi-Coated 3 Piece Filter Kit (UV-CPL-FLD) For The Canon Digital EOS Rebel T3i, T3, T1i, T2i, 60D, EOS 5D Mark III Digital SLR Cameras Which Use Any Of These (18-55mm, 75-300mm, 50mm 1.4 , 55-200, 55-250mm) LensesButterflyPhoto; Digital CameraBest price: $9.95Price in other shops: $19.95
RC-1 REMOTE Wireless Shutter Release for Canon EOS, RebelCanon; Digital CameraBest price: $0.01Price in other shops: $14.99
Professional 58mm Digital Tulip Flower Lens Hood For canon 18-55mm , 28-80mm , 28-90mm , 28-105mm , 55-250mm , 70-300mm , 75-300mm , 100-300mm , 50mm 1.4 , 85mm 1.8 with Lens cap Holder and Lens cleaning KitProfessiona; Digital CameraBest price: $1.49
LensPEN Lens Cleaning SystemLensPen; Digital CameraBest price: $3.79Price in other shops: $19.99
Transcend 32 GB Class 10 SDHC Flash Memory Card (TS32GSDHC10E)TRANSCEND; CEPrice in other shops: $31.99
|